|
| -TiteLite- Lighted Buttonhead Bolts |
Polished, hex head button head bolts with a 12 volt colored bulb installed to shine though the hex head. Sold individually. 5/16" x 3/4"
Note: Only one left in Red. |
| |
| This item usually takes about 7 days to ship |
| |
| Item no. 03030x |
Retail: $10.77 (PLUS shipping) |
| Today's Sale Price: $9.67 (FREE shipping!) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Product Description
These are 12v Straight lighted bolts made from high grade stainless steel and polished to a mirror finish. The light shines brightly through the hex head opening. They can be used for many applications: gauge lights, indicator lights, underhood lights, accent lights, etc. They are 5/16" x 3/4" polished stainless steel button head bolts and are sold in pairs. Easy to install. Use inside or outside vehicle Unlimited uses. The bulbs are rated at 10,000 hours of life under normal use. The wires on the TiteLites are nonspecific - connect any wire to the power and the other to the ground.
|
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: I am looking for a product like this with white lights can you supply them. They will make a nice and unobtrusive easy to install cab and step lighting when connected to the door open switch. |
| ANSWER: Yes, we can order white. We just don't currently have them in stock. They take 5 days to come in. Please make your order by telephone and the CSR will get them ordered. |
|
| QUESTION: Comes in Green, purple, & red.
What happened to blue & yellow shown in the picture? |
| ANSWER: Discontinued. They will all be discontinued once we have no stock left. |
|
| QUESTION: i WOULD LIKE TO USE TO FASTEN MY TAG- WHERE DO THEY TIE IN TO THE BIKE ELECTRIC R ARE THEY BATTERIE POWERED?
|
| ANSWER: You will splice the wires on the bolts into the existing license plate light wiring on your bike. |
|
| QUESTION: Are these lights bright enough to use as signal lights on my front end? |
| ANSWER: No, I wouldn't. |
|
| QUESTION: how many bolts come $9.67 pack?
and do you ship to scotland? |
| ANSWER: This is not per pack. This is the price for each one. We do ship to Scotland for $11 extra on your order. |
|
| QUESTION: From the looks of the two different pictures on this page, the top picture shows plastic nuts while the bottom picture shows stainless steel. Which is the real nut? |
| ANSWER: Plastic |
|
| QUESTION: I have a 2004 1000RR CBR and I was wondering if these can be used on on my farings...i currently have 4 bolts that connect my lower to my upper cowels.... |
| ANSWER: Depends what size the bolts on your fairing are. These are 5/16"x3/4". |
|
| QUESTION: How about the legality of using a color other then red on your license plate? I am asking about the Lighted head bolts |
| ANSWER: I do not know - you will have to check with your state. |
|
| QUESTION: are these lights bright enough to light a license plate? |
| ANSWER: No, they're more for accent lighting. |
|
| QUESTION: Hello,
can I fix the windscreen with TiteLite Lighted Buttonhead Bolts? Suzi GSX-R1000,K2
Thank you
Marcus from Germany |
| ANSWER: Yes if the holes in the windscreen are the same size as the bolts you could. |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
Event Photos
powered by
